NSW3000-16T1GT1GC-LPOE-IN PoE коммутатор с облачным управлением

NSW3000-16T1GT1GC-LPOE-IN Hardware Specification Ports Type 16 x 10/100Mbps POE port (RJ45) + 1 x Gigabit port (RJ45)+ 1 x Gigabit Combo Standards IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3ab, IEEE802.3x, IEEE802.3af, IEEE802.3at, IEEE802.3az Switching capacity 7.2 Gbps Forwarding performance 5.36Mpps Packet Buffer 4 M bit MAC 16K Weight 2.1kg Dimensions (W×D×H) 440mm x 189.8mm x 44mm Power Supply AC 100V to 240V, 50/60Hz Max.Power 165W Max.PoE Power Maximum total power: 150WMaximum PoE power for single port: 30WMode A, 1/2+, 3/6- Mode B, 4/5+, 7/8- Prior Ports 1 to 8 Cooling Fans 0 Operating temperature 0 ℃ to 40 ℃ (32 ℉ to 104 ℉) Operating humidity 10%～90% (non-condensing) Storage Temperature -40 ℃ to 70 ℃ Storage Humidity 5% to 90% RH, noncondensing Indicator POWER Steady on: AC input is normal, POWER Off: No AC input, PoE Off: No PoE power supply, PoE Steady on: PoE power supply is normal, PoE-MAX off: The POE power supply power of the whole machine is less than 80% of the specification, PoE-MAX Steady on : The POE power supply power of the whole machine is greater than 85% of the specification, LINK/ACT Off: No link, LINK/ACT Steady on: Linked, LINK/ACT Flashing: Transmitting data Software Specification Ethernet Supports full duplex, half duplex, and auto-negotiation working modesSupports enabling/disabling portsSupports port auto-negotiation rateSupports port priority flow control. Supports port flow statisticsSupports a link aggregation group (consist of two uplink ports) VLAN Supports both access and trunk modes; allows up to 32 VLANs with IDs from 1 to 4095 MAC Support (up to 16K).Supports clearing the dynamic MAC address POE Allows to view PoE status and power.Allows to enable/disable PoE power supply. Loop Detection Loop Detection QoS Supports port rate limitation.Supports broadcast storm control. Security Supports port isolation (only for the downlink ports).Supports locking login IP address, up to 64 addresses can be locked Maintenance Supports N:1 port mirroring.Supports unified software configuration, management, and search.Supports discovering the connected video devices and generating a network topology on the software.Supports device upgrade, factory settings restoration, configuration import, configuration export, logs export, and device restart on the software. System Allows to view the device name, device model, serial number, current version, IP address, MAC address, DNS, operation time, etc.Allows to edit and manage the IP address and device name.Supports single-user management, user authentication, and password modification.Supports manual time configuration and NTP .Allows to view other switches information on the same network, up to 32 switches.Allows to view the connected video devices information, up to 64 devices .